Low Temperature Evaporatorv-HP-SF-5000

In the field of application, this low-temperature evaporator has been widely used in the concentration process of industrial hazardous waste treatment. It can treat a wide variety of waste liquid, including cutting fluid wastewater, printing wastewater, cleaning wastewater, electroplating wastewater, high-salt wastewater, spray paint wastewater, landfill leachate wastewater, three-effect evaporation MVR mother liquid, high COD wastewater, membrane concentration wastewater, medical wastewater and food wastewater. In this way,the waste water evaporates between 35 and 37 ° C, becomes steam and enters the condenser, forming condensate and then exits. The pollutants in the waste water are separated in the distillation tank to form a concentrated liquid, which is automatically discharged by the sewage pipe. This process realizes the purpose of evaporation, concentration reduction, recycling and cost saving of wastewater.

Liquid handling: Atomized liquids to achieve maximum evaporation efficiency.

This equipment gets rid of the traditional high temperature distillation and normal temperature distillation mode.

The international mainstream method of low-temperature vacuum distillation is used to treat the waste liquid, and the waste liquid evaporates and boils at 35 degrees under the vacuum state of -97kpa, avoiding the occurrence of chemical homoboiling at high temperature.

To ensure the quality of recycled water standards and stability. Compared with traditional normal temperature and high temperature distillation, industrial wastewater is separated and concentrated after low temperature vacuum distillation and condensation treatment. The remaining viscous waste liquid is discharged to the storage tank for centralized treatment. Because of its environmental protection, low energy consumption, high efficiency, fully automated intelligent operation (no personnel on duty, automatic continuous work), low temperature distillation method has been widely used in the treatment of difficult waste liquid around the world. For example, oily wastewater, high-salt wastewater, heavy metal wastewater, printing wastewater, pharmaceutical wastewater, landfill leachate concentrated water, machining and surface treatment wastewater treatment. The use of this equipment can greatly reduce the waste liquid discharge of enterprises, save the cost of waste liquid recovery of enterprises, and achieve green industrial manufacturing.